Grimmspeed License Plate Relocation User Manual download pdf

GrimmSpeed Install Guide Series

Installing the GrimmSpeed Dodge Dart License Plate Kit

Updated 2/6/13

Introduction: This guide will illustrate the installation of the GrimmSpeed License

Plate Relocation Kit for the Dodge Dart.

Tools: The tools listed below are suggested for this task (figure 1).

- 17mm socket or wrench

- 5mm hex wrench

- 3mm hex wrench

Tips: A little bit of anti-seize on the main bolt will help prevent corrosion between

the aluminum bumper beam and the kit.

Procedure:

1. Begin by collecting your tools and parking your car in a safe spot.

2. First, locate and remove the factory tow hook cover using a small

screwdriver. Use care to not damage your paint.

Remove Factory Cover

1 2 3

GrimmSpeed Install Guide Series Installing the GrimmSpeed Dodge Dart License Plate Kit Updated 2/6/13 Introduction: This guide will illustrate the

3. Using a 17mm socket or wrench, install and tighten the main bolt to approximately 45ft-lbs. 4. Using the M6x25 bolt (preloaded with blue Loctite

6. Last step. Install your license plate using the provided button-heat machine screws and your 3mm hex wrench. The longer 12mm screws are for those

No comments

Grimmspeed License Plate Relocation User Manual